English
CN

Alaabta

Nickel Plating Countersunk Madaxa Isku-taabashada Istaabadaha

Nikel Plating Countersunk Madaxa Isku-taabashada Istaabadaha Sawirka Muujiyay
  • Nickel Plating Countersunk Madaxa Isku-taabashada Istaabadaha
  • Nickel Plating Countersunk Madaxa Isku-taabashada Istaabadaha
  • Nickel Plating Countersunk Madaxa Isku-taabashada Istaabadaha
  • Nickel Plating Countersunk Madaxa Isku-taabashada Istaabadaha
  • Nickel Plating Countersunk Madaxa Isku-taabashada Istaabadaha
  • Nickel Plating Countersunk Madaxa Isku-taabashada Istaabadaha

Sharaxaada wax soo saarka:

Nooca Madaxa Madaxa CSK
Nooca wadista Phillips Drive
Dhexroorka M3.5(#6) M3.9(#7) M4.2(#8) M4.8(#10) M5.5(#12) M6.3(#14)
Dhererka Laga soo bilaabo 13mm ilaa 100mm
Qalab 1022A
dhame Nikel Plating

 


Faahfaahinta Alaabta

Tags Product

Faa'iidooyinka

Faa'iidooyinka Isticmaalka Istaabadaha Is-taabashada

1) Is-taabista Isbiirta waxa si gaar ah loogu talagalay in si weyn loo dhimo wakhtiga diyaarinta hawsha iyada oo meesha laga saarayo baahida loo qabo qodista hore ama maydhista.

2) Waxaa si weyn loogu isticmaalaa warshadaha baabuurta iyo dhismaha.

3) Waxa kale oo ay ka tagtaa hadhaa yar si aanad uga werwerin qaska uu inta badan ka tago.

Faa'iidooyinka Isticmaalka Darista Nickelka

1) Dajinta nickelku waxay bixisaa isku-dar gaar ah oo daxalka ah waxayna xidhataa iska caabin.

2) Waxay ku dari kartaa dhalaal, dhalaal iyo soo jiidasho.

3) Waxa kale oo ay bixisaa guryaha adhesion aad u fiican ee lakabyada daahan dambe

Halbeegga Alaabta

Qiyaas

Cabbirka (inch)

Cabbirka (mm)

Qiyaas

Cabbirka (inch)

Cabbirka (mm)

#6
(3.5mm)

 #6 x 1/2"

3.5X13

#7
(3.9mm)

 #7 x 1/2"

3.9X13
#6 x 5/8"

3.5X16

 #7 x 5/8"

3.9X16
#6 x 3/4"

3.5x19

 #7 x 3/4"

3.9x19
#6 x 1"

3.5X25

 #7 x 1"

3.9X25
#6 x 1-1/4"

3.5X32

 #7 x 1-1/4"

3.9X32
#6 x 1-3/8"

3.5X35

 #7 x 1-3/8"

3.9X35
#6 x 1-1/2"

3.5X38

 #7 x 1-1/2"

3.9X38
#6 x 1-5/8"

3.5X41

 #7 x 1-5/8"

3.9X41
#6 x 1-3/4"

3.5X45

 #7 x 1-3/4"

3.9X45
#6 x 2"

3.5X50

 #7 x 2"

3.9X50
#6 x 2-1/8"

3.5X55

 #7 x 2-1/8"

3.9X55
#6 x 2-1/4"

3.5X60

 #7 x 2-1/4"

3.9X60
#6 x 2-1/2"

3.5X63

 #7 x 2-1/2"

3.9X63
#6 x 3"

3.5X75

 #7 x 3"

3.9X75

 

#8
(4.2mm)

 #8 x 1/2"

4.2X13

#10
(4.8mm)

 # 10 x 3/4"

4.8x19
# 8 x 5/8"

4.2X16

 # 10 x 1"

4.8X25
#8 x 3/4"

4.2x19

 # 10 x 1-1/8"

4.8X30
#8 x 1"

4.2X25

 # 10 x 1-1/4"

4.8X32
# 8 x 1-1/8"

4.2X30

 # 10 x 1-3/8"

4.8X35
# 8 x 1-1/4"

4.2X32

 # 10 x 1-1/2"

4.8X38
# 8 x 1-3/8"

4.2X35

 # 10 x 1-5/8"

4.8X41
# 8 x 1-1/2"

4.2X38

 # 10 x 1-3/4"

4.8X45
# 8 x 1-3/4"

4.2X45

 #10 x 2"

4.8X50
#8 x 2"

4.2X50

 # 10 x 2-1/8"

4.8X55
#8 x 2-1/4"

4.2X60

 # 10 x 2-1/4"

4.8X60
#8 x 2-1/2"

4.2X63

 # 10 x 2-1/2"

4.8X63
#8 x 3"

4.2X75

 #10 x 3"

4.8X75
#8 x 4"

4.2X100

 # 10 x 4"

4.8X100

Hordhaca Warshada iyo Faa'iidooyinka

In 2008, Tianjin Xinruifeng Technology Co., Ltd. waxaa la aasaasay magaalada xeebta quruxda badan ee Tianjin.Horumarin ka badan toban sano ka dib, waxaan hadda ku jirnaa wax soo saar iyo ganacsi isku dhafan oo leh awood aad u wanaagsan xagga naqshadeynta, horumarinta, wax soo saarka, iyo dhoofinta.Alaabooyinkayaga ugu muhiimsan waxaa ka mid ah birta qallalan, boolasha chipboard, boolal is-qodista, boolal is-taabsi ah, kuwaas oo laga soo saaro 3 saldhig oo kala duwan oo leh dhul dhan 16,000 mitir oo laba jibbaaran.

 

Waxaan haynaa 280 qalab wax soo saar oo toos ah, oo ay ku jiraan mishiinnada sawir-qaadista silig, mashiinnada madaxa qabow, mashiinnada dunta, mashiinnada dabada, iyo khadadka-daaweynta kulaylka.Waxaa jira in ka badan 100 shaqaale ah shirkaddayada.Waxaa ka mid ah, waxaa jira koox khibrad iyo xirfad leh oo R & D ah, oo raacaya nidaamka maaraynta iyo nidaamka xakamaynta tayada, taas oo noo ogolaanaysa inaan u habeyno alaabooyinka iyadoo loo eegayo naqshadahaaga gaarka ah / shuruudahaaga tayada ugu sareysa.

Codsiga

Muraayado is-taajinta waxay ku fiican yihiin isticmaalka biraha, noocyada kala duwan ee balaastikada (plywood, fiberglass, polycarbonates), iyo alaabta la shubay ama la been abuurtay, sida birta, aluminium, naxaas, ama naxaas.

Kaashashka is-taajinta sidoo kale waxay u shaqeeyaan sagxadaha meel aanad ku ilaalin karin dhamaadka dambe ee lowska.

Codsiyada caadiga ah waxaa ka mid ah xiridda qaybaha aluminiumka, ku dhejinta biraha alwaaxa ah, ama gelista boolal guryaha caagga ah.

Habka wax soo saarka

Sawirka Siliga

Feedh Madaxa

Duubista Dulmiga

Daawaynta kulaylka

dhame daawaynta

Tijaabada Tayada

Baakad

Soodejinta weelka

Raritaanka

Xidhmada iyo Gaadiidka

Bac tolan, kartoon, sanduuqa midabka+ kartoonka midabka, palette iwm (codsigii macmiilka).

Guud ahaan, wax soo saarku wuxuu qaadan doonaa 4-5 toddobaad hal weel.Fadlan nala hubi faahfaahinta marka aad haysato tiro cayiman.Warshad ahaan, waxaan dammaanad qaadi karnaa bixinta dalabkaaga waqtigeeda waxaanan isku dayi doonaa sida ugu fiican si aan ula kulanno waqtigaaga kama dambaysta ah.Sida caadiga ah, shixnadaha ayaa ka dhoofi doona Dekedda Tianjin.

FAQ

1.waa maxay kabaalka is-taajinta?

"Bulshadaha is-taajinta, nalalka is-taajinta waxay leeyihiin noocyo kala duwan oo caaro ah iyo qaabab dun ah, waxaana lagu heli karaa ku dhawaad ​​naqshad kasta oo suurtagal ah ee madaxa furaha. Tilmaamaha caadiga ah waa dunta dunta oo daboolaysa dhererka dhererka dhererka caarada ilaa madaxa iyo si loo dhawaaqo. dun adag oo ku filan substrate-ka loogu tala galay, inta badan kiis-ku adkeeya habka daaweynta kulaylka.

Waxaan u magacaabi karnaa boolal soo socda si waafaqsan madaxa.

Bugle, CSK, Truss, Pan, Hex, Pan samaynta boolal is-taajinta.

Waxaan u magacaabi karnaa boolal soo socda si waafaqsan barta.

Af fiiqan, nooca 17 goynta, daloolin, dhibic qaaddo boolal is-taajinta."

2.sidee u shaqeeyaan nalalka is-tabinta leh?

Waxaad ku dhejin kartaa looxa alwaax ama bir adigoo isticmaalaya darawal, sidoo kale waxaad ku dhejin kartaa birta darawalka.

3. muxuu u eg yahay biraha istaajinta?

Iskaashatada is-taajinta waxay u egyihiin biro, waxaa jira madax ama dhibco kala duwan sida CSK, bugle, truss, digsi, madaxa Hex.

4.maxaa loo isticmaalaa istaabashada?

Waxaad ku dhejin kartaa looxa alwaax ama bir, sidoo kale waxaad ku dhejin kartaa birta birta.

5.sidee meesha looga saaraa boolal is-taajinta?

Waxaad ka saari kartaa boolal is-taajinta adigoo isticmaalaya darawalka.

6.Isku-dhufashada ma u fiican yihiin alwaax?

Haa, biraha birta qallalan ee dunta qallafsan, biraha birta ah, nalalka alwaaxyada, madaxa hex madaxa is taabsiista leh oo leh bar fiiqan, madaxa hex iskii isku taabsaday oo leh bar qaaddo, hex madax iskiis taabsi leh oo leh barta layliga.

7.sidee loo cabbiraa boolal is-taajinta?

Waxaad ku cabbiri kartaa istaabashada istaabka adigoo isticmaalaya calipers.

8.Intee in le'eg ayay caarada is-taajinta hayn kartaa?

Isku-dhufashada is-taabashada ee cabbirrada kala duwan ayaa kala duwan miisaanka haynta.

9.sida loo isticmaalo nalalka is-tasida iyadoon lalin?

Waxaad isticmaali kartaa biraha dhumucdiisu ka yar tahay 3mm adiga oo aan lahayn daloolin.

10.waa maxay boolasha sagxada is-taabista?

Nalalka sagxada sagxada iskood isku taaga ayaa badi loo isticmaalaa in lagu xidho alaabta sagxadda.

  • Hore:
  • Xiga:

    • Alaabooyinka La Xiriira

    Zinc Cad oo Dahaaran Xarig Fiican ee Phillips Drive-ka Qallalan

    Zinc cad oo lagu dahaadhay Sadex Fiican...

    Xinruifeng Fastener Ruspert Zinc Saqafka labanlaaban ee saqafka sare ee Hex Washer madaxa birta is- qodida

    Xinruifeng Fastener Ruspert...

    Jaalle/White Zinc Plated Countersunk Head Chipboard Sholls

    Jaalle/White Zinc Plated Co...

    Dhibicda Drill Head Truss Isku-xidhka Madow ee Fosfate-ka Madow ee Is-Qodista Is-Qodista

    Dhibicda dhibicda Drill Head Truss...

    Xinruifeng Xinruifeng Kaarboon Birta Kaarboon Tayada Sare leh

    Xinruifeng Fastener Carbon...

    Isku-xidhka Isku-dhafka ah ee Fosfate Madaw ee Isku-xidhan ee gidaarka qallalan

    Isku-xidhka Isku-dhafka Black Phosp...